Envoy and ISS - Cabled - 6316CUKX

The Integrated Sensor Suite (ISS) includes the tipping bucket rain collector, the fan assisted radiation shield for the temperature / humidity sensor. The tipping bucket mechanism records rain every 0.2mm and is chrome plated to reduce loss through evaporation

Dependant on which ISS version you opt for the ISS also has a fan assisted radiation and the solar and UV sensors

The anemometer is supplied with a 12m cable to plug into the ISS transmitter.

• Wind Speed displayed in the range 2 to 150mph displayed in mph, knots, m/s or kph.
• Wind Direction displayed in 16 points of the Compass Rose or 0° to 360°
• Temperature in the range -40°C to +65°C displayed in °C or °F.
• Relative Humidity in the range 0% to 100%.
• Rainfall in mm or inches and rate in mm or inches per hour.
• Solar radiation in the range 0 to1800 W/m2 and energy in the range 0 to 1999.9 Ly.
• UV Dose in the range 0 to 199 MEDs and Index from 0 to 16.
• Calculated values for windchill, dew point, heat index and evapotranspiration.

Solar, UV and therefore evapotranspiration are included in the Plus Versiom.

Must be connected using one of the Davis WeatherLink data logger and software options. This will collect time stamped data from the console at intervals from 1 minute to 2 hours.

See Davis WeatherLink product page for more details.

Installation is very simple and can be carried out by almost anyone with a few basic tools. The only thing you should remember is to take care if you have to work at height.

The outdoor sensor suite and anemometer are supplied with U clamps for a 45mm Ø pole and coach screws for a post or wall. Larger U clamps can be used up to 65mm Ø

Installations options such as tripods and mounting pole kits are available from our Installation Kit pages.

For suggestions about installation please see our knowledgebase.

Davis weather stations require very little maintenance and do not require regular recalibration. This section of our knowledgebase explains what is required