Complete Weather Station - WS2350

A neat system well designed with great functionality.

Displays and records all the basic weather data including barometer, rain, wind, temperature and humidity.

This version has a cup anemometer for improved wind speed measurement rather than the previous impeller design.

The package is complete with all sensors, batteries and power adapters. There are also some simple fixings included.

• Barometric Pressure reading is displayed in hPa or inHg in the range 300 to 1099 hPa
• Weather forecast display by weather icons (sunny, cloudy, rainy)
• Weather tendency indicator and storm warning alarm
• Indoor Temperature in the range -10°C to +60°C
• Min / Max memory with time stamp for temperature, humidity, wind, barometer, dew point and wind chill
• Programmable alarm for barometer, temperature, humidity, rainfall, wind, wind chill and dew point
• DCF-77 radio controlled time and date reception with +/- 12 hour time zone offset
• LED back light (15 seconds when any key is pressed)

• The weather station has a serial data logger and is supplied with both serial connection and USB to serial adapter with virtual com port drivers
• Data is gathered by the computer, which can be used to create graphs or to export it
• Storage capacity of 175 sets of data with date and time
• 1 minute to 24 hours data recording interval
• EEPROM memory (non volatile ring buffer memory)

The outdoor sensors use the temperature and humidity sensor as their transmitter back to the console. The wind and rain sensors are connected by 10m cables to the transmitter.

Used wirelessly the transmitter has a range of up to 100m. It can also be cabled back to the console using the supplied 10m cable.

All of the cables can be extended by a further 10m.

• Wind Speed displayed in the range 0 to 110 mph in mph, knots, beaufort, km/h or 0m/s
• Wind Direction displayed in compass rose segments or degrees
• Temperature displayed in the range -30.0°C to +70°C in °C or °F
• Relative Humidity displayed in the range 20% to 95%
• Rain for the past 1 hour, 24 hours and total since last reset in mm or inches
• Calculated values for wind chill and dew point

Included with this weather station is the manufacturers own simple HeavyWeather software. The software can display data locally, export to a spread sheet and upload to the web. It is compatible with Windows 2000, XP, Vista and 7. Also included is a lite version of the popular WeatherDisplay software that can be upgraded to the full version.

Installation is very simple. You might need a high pole or post for the wind sensor, a flat surface for the rain collector and somewhere out of direct sun for the temperature humidity sensor

Consideration is needed to get the cables from the wind sensor and rain gauge back to the transmitter.

Display console can be wall mounted or stand on a table.